The main items displayed on the System page are as follows.
4-2. Defaults > Media Input
On the Media Input page, you can assign paper sizes and paper types to each cassette or tray for paper supply.
4-3. Defaults > Document Output
The Document Output Page is used to select the output tray.
4-4. Defaults > FRPO Parameters > I/F Independent
The FRPO Parameters are a variety of printer settings that are stored in the internal memory of the printer. The I/F
Independent Page of the FRPO Parameters is used to change the FRPO parameters that are common to all of the
interfaces. Refer to the instruction manual of the printer for details on each of the parameters.
4-5. Defaults > FRPO Parameters > I/F Dependent
The I/F Dependent Page of the FRPO Parameters is used to change interface-specific FRPO parameters for each of the
interfaces. Refer to the instruction manual of the printer for details on each of the parameters.
4-6. Send Data > Printable Data
This sends files directly to the IB-23 for printing. The following files can be printed. You can also print text that you enter
through the COMMAND CENTER.
Item
Descri
tion
Emulation Sets emulation for each interface.
KIR Mode Smoothing from Kyocera Image Refinement (KIR) can be switched on and off.
EcoPrint Mode EcoPrint can be used to conserve toner and reduce printing costs. This feature can
be switched on and off. By default, it is off.
Resolution For designating the printing resolution.
Duplex Mode Switched duplex printing on and off.
Copies For designating the number of copies.
Page Orientation For switching between printing in landscape and portrait mode.
Item
Descri
tion
Default Determines the cassette for the default settings used in supplying paper.
Tray Shows the available cassettes. Any optional cassettes the printer is equipped with
are also displayed.
Size Shows the paper size for the selected cassette.
Type Shows the paper type designated for the cassette or multi-purpose tray for paper
supply. You can change paper type from the dropdown list.
Item Description
Default Selects the tray that will output the paper.
Paper Output Shows the available output trays.
Output Orientation
Shows the orientation of the paper when it is ejected from the printer. The
Face
up
setting ejects the paper with the printed surface facing up, and the
Face down
setting ejects the paper with the printed surface facing down.
9/19 ページUsing a Web Browser to Manage the IB-23
2006/05/26file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\card_homepag...
To Next Page
Loading...
