Kyocera FS-C5025N - Page 82

5-13. Management/E-mail > SNMP > Trap
If you are using the SNMP protocol and an error such as paper out occurs, the IB-23 generates a trap and sends it to the
trap recipients. You can setup two trap recipients. The setting details are the same for both recipients.
5-14. Management/E-mail > Maintenance
A
printer maintenance request mail can be sent periodically to a specified address.
User Name Enter the username used by SNMPv3. Maximum of 32 single-byte characters.
Authentication Protocol You can choose between MD5 and SHA.
Authentication Password
Enter the password for authentication. Enter between 8 and 32 single-byte
characters.
Privacy Password
Enter the password for encryption. Enter between 8 and 32 single-byte
characters.
SNMPv1/v2c SNMPv1/v2c can be set to enabled (
On
),
Read Only
, or disabled (
Off
). Turn
SNMPv3 off if this setting is set to
On
.
Read Community This is used to read device information. The default read community string is
public. The correct read community needs to be entered for an administration
utility to send an SNMP request to read a value, otherwise the IB-23 will reject the
request.
Write Community This setting functions similarly to the read community setting except that it is used
for SNMP requests to write values.
sysContact
This is the MIB-II sysContact object, which typically contains the email address of
the network administrator.
sysName
This is the MIB-II sysName object, which typically contains the host name or
domain name of the IB-23.
sysLocation
This is the MIB-II sysLocation object, which typically contains information about
the location of the IB-23.
HP Web Jetadmin Compatibility Enables (
On
) or disables (
Off
) compatibility with HP Web Jetadmin.
Item Description
Authentication Traps
Enables (
On
) or disables (
Off
) the MIB-II EnableAuthenTrap object. If this setting
is enabled (
On
), an SNMP trap is generated if an attempt is made to read or write
using an invalid community string. The trap is sent to the contained trap address.
Trap Community The SNMP trap community string used when the IB-23 generates a trap.
Trap IP Address The IP address that receives traps.
Trap IPX Address The IPX address that receives traps.
Selected Errors
Select the events that generate traps from
Low Toner
,
Add Toner
,
Paper Jam
,
Add Paper
,
Cover Open
, and
All Other Errors
.
Item Description
Equipment ID You can specify any arbitrary number as the system ID number. Enter up to a
maximum of 15 single-byte characters.
16/19 ページUsing a Web Browser to Manage the IB-23
2006/05/26file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\card_homepag...