6. Click
Submit
.
7. Click
Trap
.
8. Fill in each of the fields. A description of each of the fields is given below.
9. Click
Submit
to complete the configuration.
public.The correct read community needs to be entered for an administration
utility to send an SNMP request to read a value, otherwise the IB-23 will reject the
request.
Write Community This setting functions similarly to the read community setting except that it is used
for SNMP requests to write values.
sysContact
This is the MIB-II sysContact object, which typically contains the email address of
the network administrator.
sysName
This is the MIB-II sysName object, which typically contains the host name or
domain name of the IB-23.
sysLocation
This is the MIB-II sysLocation object, which typically contains information about
the location of the IB-23.
HP Web Jetadmin Compatibility Enables (
On
) or disables (
Off
) compatibility with HP Web Jetadmin.
Authentication Traps
Enables (
On
) or disables (
Off
) the MIB-II EnableAuthenTrap object. If this setting
is enabled (
On
), an SNMP trap is generated if an attempt is made to read or write
using an invalid community string. The trap is sent to the contained trap address.
Trap Community The SNMP trap community string used when the IB-23 generates a trap.
Trap IP Address The IP address that receives traps.
Trap IPX Address The IPX address that receives traps.
Selected Errors
Select the events that generate traps from
Low Toner
,
Add Toner
,
Paper Jam
,
Add Paper
,
Cover Open
, and
All Other Errors
.
Top of page
3/3 ページSNMP (Simple Network Management Protocol)
2006/05/26file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\SNMP.htm
To Next Page
Loading...
