Using the Operation Panel
2-40
2
Press or repeatedly until Page Set > appears.
3
Press .
4
Press or repeatedly until >LF Action appears.
5
Press [OK]. A blinking question mark (?) appears.
6
Press or repeatedly until the desired linefeed action appears.
7
When the desired action is displayed, press [OK].
8
Press [Menu]. The display returns to Ready.
Carriage-Return (CR) Action
This procedure instructs the printer what to do when it receives a carriage-return code (0DH).
• CR only: A carriage-return is performed (Default).
• CR and LF: A linefeed and carriage return are performed.
• Ignore CR: The carriage-return is ignored.
1
Press [Menu].
2
Press or repeatedly until Page Set > appears.
3
Press .
4
Press or repeatedly until >CR Action appears.
5
Press [OK]. A blinking question mark (?) appears.
6
Press or repeatedly until the desired carriage-return action appears.
7
When the desired action is displayed, press [OK].
8
Press [Menu]. The display returns to Ready.
Page Set >
>LF Action
LF only
>LF Action
? LF only
Page Set >
>CR Action
CR only
>CR Action
? CR only
To Next Page
Loading...
Need help?
General