Kyocera FS-C8100DN - Page 93

Using the Operation Panel
2-77
2
Press  or  repeatedly until Others > appears.
3
Press .
4
Press  or  repeatedly until >Registration Detail >
appears.
5
Press .
6
Press  or  repeatedly until >> Print Registration Chart appears.
7
Press [OK]. A question mark (?) appears.
8
Press [OK]. Processing appears and a color registration correction chart is printed out. There are
H-1 to H-7 (upper part) and V-1 to V-5 (lower part) registration charts for each color (cyan,
magenta and yellow) included on the color registration correction chart.
Adjusting Colors
1
Perform steps 1 through 5 in the above section.
2
Press  or  repeatedly until >>M 1234567 3 (Adjust Magenta)
appears.
Others >
>Registration >
Details
>>Print Registra
tion Chart ?
>>M 1234567 3
MH=0000000 MV=0