Kyocera Hydro - Page 143

134
6. When prompted, draw the screen unlock pattern again, and then touch Confirm.
Note: Clear the Make pattern visible check box if you do not want the pattern to be
displayed on the screen when you draw it.
To use a PIN:
1. Press Home > Menu and touch System settings > Security > Screen lock.
2. Touch PIN.
3. Enter a PIN and touch Continue.
4. Enter your PIN again and touch OK to confirm it.
To use a password:
1. Press Home > Menu and touch System settings > Security > Screen lock.
2. Touch Password.
3. Enter a password and touch Continue.
4. Enter your password again and touch OK to confirm it.
Note: Select the Vibrate on touch check box if you want the device to vibrate when you
draw the pattern or enter the PIN.
Note: Touch Automatically lock to select the time duration before the screen lock feature
activates.
Note: Select Power button instantly locks to activate the screen lock feature by pressing
the Power button.
Note: Touch Owner info to enter your information to be displayed on the lock screen.
To change or disable the screen lock:
1. Press Home > Menu and touch System settings > Security > Screen lock.
2. Draw your unlock screen pattern, or enter your PIN or password and touch Next.
3. Touch None to disable the screen lock or change the unlock mode.
- or -
Touch Slide to return to the default slide lock.
Encrypt Data
You can encrypt your device and the SD card installed in your device. For both encryption and
decryption, you need a PIN or password for the screen lock. (See
Screen Lock
to set a PIN or