2HA/2HB
1-3-19
U066
Adjusting the scanner leading edge registration
Description
Adjusts the scanner leading edge registration of the original scanning.
Purpose
Make the adjustment if there is a regular error between the leading edges of the copy image and original.
Caution
Before making this adjustment, ensure that the following adjustments have been made in maintenance mode
Adjustment
1. Press the start key.
2. Press the interrupt key.
3. Place an original and press the start key to make a test copy.
4. Change the setting value using the zoom +/- keys.
For copy example 1, decrease the value. For copy example 2, increase the value.
Figure 1-3-8
5. Press the start key. The value is set.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
Maintenance
item No.
Description
U066
U034
(P.1-3-12)
U071
(P.1-3-22)
Description Setting range Initial setting
Scanner leading edge registration -32 to 20 7
Original Copy
example 1
Copy
example 2
Scanner leading edge registration
To Next Page
Loading...
