2HA/2HB
1-3-21
U070
Adjusting the DP magnification
Description
Adjusts the DP original scanning speed.
Purpose
Make the adjustment if the magnification is incorrect in the auxiliary scanning direction when the optional DP
is used.
Caution
Before making this adjustment, ensure that the following adjustments have been made in maintenance mode
Method
Press the start key.
Adjustment
1. Select the item using the exposure adjustment keys.
2. Press the interrupt key.
3. Place an original on the DP and press the start key to make a test copy.
4. Change the setting value using the zoom +/- keys.
For copy example 1, increase the value.
For copy example 2, decrease the value.
Figure 1-3-10
5. Press the start key. The value is set.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
Maintenance
item No.
Description
U065
(P.1-3-18)
U053
(P.1-3-16)
U070
Exposure
indicator
Description
Setting
range
Initial
setting
Exp. 1 Original conveying motor speed (First side) -25 to 25 0
Exp. 2 Original conveying motor speed (Second side) -25 to 25 0
Original Copy
example 1
Copy
example 2
To Next Page
Loading...
