10
3. Copy
3.1 Copy Mode Screen
The picture below is the basic Copy Mode Screen to make a copy.
Make sure that “Ready to Copy” is indicated in the upper left of the screen before copy.
Originals can be carried to the scanner only when Copy/Scan Mode Screen is displayed.
Make sure that “Ready to Set Copy” is indicated in the upper left of the screen before set
copy.
How to launch or cancel “Ready to Set Copy” is described later.
After reading the first page of the original, “Ready to Set Copy” and “Press Start to start
printing” are indicated by turns.
The number of the scan originals is indicated in upper right of the screen.
The other settings you should check before copy are as following.
• Size
• Image Type
• Density
• Cut Mode
• Zoom
The above settings are described later.
To Next Page
Loading...
