8
2.11 Stop Key
Stop Key is only available during printing or scanning.
Press the Stop Key to cancel the current printing, eject the paper and delete the job
concerned.
Press and hold Stop Key for 3 seconds or more to cancel the current printing, eject the
paper, delete all the jobs in queue and delete images for Recopy.
Press the Stop Key to cancel the current scanning and stop carrying the original.
(You should remove it by hand with the upper scanner unit open.)
2.12 Start Key
Press the Start Key each time to start copy/scan when Auto Start is “OFF”.
Press the Start Key to start a set copy.
2.13 Numeric Keys
The Numeric Keys are used to enter numeric data such as set copy count or magnification
value.
2.14 Clear Key
Press the Clear Key to ignore the changes and recover the default setting.
2.15 L1, L2, L3, L4, R1, R2, R3 and R4
L1
, L2, L3, L4, R1, R2, R3 and R4 keys are used to operate the assigned functions with
the signs beside the respective keys and indicated in the screen.
- used to choose the left item.
- allows the cursor to slide left.
- used to decrease the value.
- used to choose the right item.
- allows the cursor to slide right.
- used to increase the value.
- allows the cursor to move right in rotation.
- allows the cursor to move down in rotation.
- used to enter the next step.
- used to apply the setting.
- used to execute the indicated operation.
To Next Page
Loading...
