Kyocera KM-3650W - Original Length; Original Orientation; Image Type

30
4.3.2 Original Length
To specify the original length, press the L1 Key to enter Original Size screen.
When selected, “Synchro”, the image length is the same as the original.
When selected “Standard”, one of the following prescribed size is applied.
Which one to be applied depends on a combination of Original Width and Original
Orientation.
Press the L2 Key for “Synchro”, and R2 Key for “Standard”.
Press the Enter Key to apply the setting.
DIN:
Original Width A3 A2 A1 A0 36”
Landscape 210mm 297mm 420mm 594mm 24” Original
Orientation
Portrait 420mm 594mm 841mm 1189mm 48”
ENG:
Original Width 11” 17” 22” 34” 36”
Landscape 8.5” 11” 17” 22” 24” Original
Orientation
Portrait 17” 22” 24” 44” 48”
ARCH:
Original Width 12” 18” 24” 30” 36”
Landscape 9” 12” 18”
Not available
24” Original
Orientation
Portrait 18” 24” 36” 42” 48”
“Synchro” disables Original Orientation.
4.3.3 Original Orientation
To specify the original orientation, press the L1 Key to enter Original Size screen.
“Landscape” makes the scanner carry an original in landscape orientation.
“Portrait” makes the scanner carry an original in portrait orientation.
Press the L3 Key to choose “Landscape”, and R3 Key to “Portrait”.
Original orientation is disabled on the following situations.
In case Original Width is “Auto”.
In case Original Length is “Synchro”.
4.3.4 Image Type
The following settings are provided for the original image type.
“Line” is suitable for simple line originals.
“Line/Grayscale” is suitable for originals which include lines and areas of shade together.
“Grayscale” is suitable for photographic originals and areas of shade originals.
Press the R1 Key repeatedly for a proper image type.