27
The sign “Rescan” is indicated in the upper right of the screen under Rescan Mode.
Rescan is use of if the wrong original is read, or if the scanner carries originals on the skew.
The new scan image overwrites the previous one.
Rescan Mode is cancelled after scanning the ReScan.
Pressing the ReScan Key again is another measure to cancel Rescan Mode.
Rescan is disabled in case no image exists for Rescan
Rescan is disabled in case of changing the destination or FTP to save.
4.2.4 Password
Making a scan image requires a password when a destination or FTP folder involves the
password authentication.
Type a password with the numeric keys and press the Enter Key.
(Default password: “0000”)
To Next Page
Loading...
