36
5. Menu
5.1 Menu Mode screen
The following general settings are provided in Menu Mode.
• Trim Cut
• Basic Configuration
• Information
• Date/Time
• Image data Delete Memory
• Test Mode
• User Mode
• Service Mode
Press the Menu Key to enter Menu Mode.
5.2 General Settings
5.2.1 Trim Cut
Trim Cut makes the leading edge of roll paper straight by a cutoff.
Press the L1 Key repeatedly for “Roll 1” or “Roll 2”.
Press the Start Key to make a cutoff on the roll paper.
5.2.2 Image data Delete Memory
Press the R1 Key to delete the image for Recopy.
When the message shown below is displayed, press the Enter Key to execute the
operation.
To Next Page
Loading...
