Kyocera KM-3650W - Page 17

16
3.3.5.3 Paper Size Zoom
Specifying both the original size and the paper size enables KM-3650w to apply an
appropriate magnification.
Press the L3 Key repeatedly for the original size, R3 Key for the paper size.
The following page size definitions are provided.
DIN: 36x48, A0, A1, A2, A3, A4
ENG: 36x48, 34x44, 22x34, 17x22, 11x17, 8.5x11
ARCH: 36x48, 30x42, 24x36, 18x24, 12x18, 9x12
Press the Enter Key to apply the setting.
Some of the Paper Size Zoom setting combinations are out the range of the magnification
adjustment.
Magnification is automatically corrected to 25.0% for the following combinations.
Original size Paper size Actual magnification
36x48
Æ
8.5x11 23 percent
36x48
Æ
A4 23 percent
Magnification is automatically corrected to 400.0% for the following combinations.
Original size Paper size Actual magnification
8.5x11
Æ
36x48 436 percent
A4
Æ
36x48 435 percent
3.3.5.4 Calibrate Mag.
The vertical (length) zoom and horizontal (width) zoom can be specified separately.
Press the L4 Key for “ON”, and then press the Enter Key.
Press the R4 Key to enter Magnification Settings (2).
Width and length adjustment covers from - 5.0 to + 5.0 percent in increments of 0.1 percent.
Press the R2 Key to increase the horizontal zoom, L2 Key to decrease.
Press the R3 Key to increase the vertical zoom, L3 Key to decrease.
Press the Enter Key to apply the setting.