2GN/2GP/2GR
1-4-3
Section Description Conditions Specified time
System 04
Cover open
Cover is open during copying. -
05
Secondary paper feed
does not start
Secondary paper feed does not start within specified time
of arrival of paper at the registration section.
30 s
09
3000-sheet paper
feeder sequence error
jam
A communication sequence error occurs between the
machine and the 3000-sheet paper feeder.
-
Paper
feed
section
10
No paper feed from
cassette 1
Feed switch 1 (FSW1) does not turn on within the speci-
fied time of upper paper feed clutch (PFCL-U) turning on;
the clutch is then successively turned off for 1 s and
turned back on, but the switch again fails to turn on within
the specified time.
1489 ms (30 ppm)/
1152 ms (40/50 ppm)
11
No paper feed from
cassette 2
Feed switch 2 (FSW2) does not turn on within the speci-
fied time of lower paper feed clutch (PFCL-L) turning on;
the clutch is then successively turned off for 1 s and
turned back on, but the switch again fails to turn on within
the specified time.
1562 ms (30 ppm)/
1209 ms (40/50 ppm)
12
No paper feed from
optional cassette 3
Feed switch 3 (FSW3) does not turn on within the speci-
fied time of paper feeder paper feed clutch 1 (PFPFCL1)
turning on; the clutch is then successively turned off for 1
s and turned back on, but the switch again fails to turn on
within the specified time (paper feed from optional paper
feeder).
1562 ms (30 ppm)/
1209 ms (40/50 ppm)
Feed switch 3 (FSW3) does not turn on within the speci-
fied time of paper feeder paper feed clutch 1 (PFPFCL1)
turning on; the clutch is then successively turned off for 1
s and turned back on, but the switch again fails to turn on
within the specified time (paper feed from optional 3000-
sheet paper feeder).
2044 ms (30 ppm)/
1582 ms (40/50 ppm)
13
No paper feed from
optional cassette 4
The paper feeder feed switch (PFFSW) does not turn on
within the specified time of paper feeder paper feed
clutch 2 (PFPFCL2) turning on; the clutch is then succes-
sively turned off for 1 s and turned back on, but the switch
again fails to turn on within the specified time (paper feed
from optional paper feeder).
1562 ms (30 ppm)/
1209 ms (40/50 ppm)
14
No paper feed from MP
tray
The MP feed switch (MPFSW) does not turn on within the
specified time of the MP paper feed clutch (MPPFCL)
turning on; the clutch is then successively turned off for 1
s and turned back on, but the switch again fails to turn on
within the specified time.
5056 ms (30 ppm)/
3913 ms (40/50 ppm)
15
Jam in paper feeder
horizontal paper con-
veying section 1
Paper path sensor 3 (PPSENS3) does not turn on within
specified time of paper feeder paper feed clutch 2
(PFPFCL2) turning on (paper feed from optional 3000-
sheet paper feeder).
823 ms (30 ppm)/
637 ms (40/50 ppm)
16
Jam in paper feeder
horizontal paper con-
veying section 2
Paper path sensor 2 (PPSENS2) does not turn on within
specified time of the paper path sensor 3 (PPSENS3)
turning on (paper feed from optional 3000-sheet paper
feeder).
879 ms (30 ppm)/
681 ms (40/50 ppm)
17
Jam in paper feeder
horizontal paper con-
veying section 3
Paper path sensor 1 (PPSENS1) does not turn on within
specified time of the paper path sensor 2 (PPSENS2)
turning on (paper feed from optional 3000-sheet paper
feeder).
539 ms (30 ppm)/
417 ms (40/50 ppm)
To Next Page
Loading...
