2FB/2FC
1-4-54
U252
Setting the destination
Description
Switches the operations and screens of the machine according to the destination.
Purpose
To be executed after initializing the backup RAM by running maintenance item U020, in order to return the set-
ting to the value before replacement or initialization.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select the destination. The selected item is displayed in reverse.
2. Press the start key.
The setting is set, and the machine automatically returns to the same status as when the power is
turned on.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key.
The screen for selecting a maintenance item No. is displayed.
Supplement
The specified initial settings are provided according to the destinations in the maintenance items below.
To change the initial settings in those items, be sure to run maintenance item U021 after changing the destina-
tion.
Initial setting according to the destinations
Maintenance
item No.
Description
Display Description
JAPAN METRIC Metric (Japan) specifications
INCH Inch (North America) specifications
EUROPE METRIC Metric (Europe) specifications
ASIA PACIFIC Metric (Asia Pacific) specifications
Mainte-
nance
Title Japan Inch Europe Metric,
Asia Pacific
208 Setting the paper size for
the deck
A4 11 x 8.5 A4
212 Setting the deck lift opera-
tion
UPPER SIDE SIDE
253 Switching between double
and single counts
SINGLE COUNT DOUBLE
COUNT
DOUBLE
COUNT
258 Switching copy operation
at toner empty detection
055
264 Setting the display order of
the date
YEAR-MONTH-
DATE
MONTH-DATE-
YEAR
DATE-MONTH-
YEAR
344 Setting preheat/energy
saver mode
ENERGY STAR ENERGY STAR GEEA
To Next Page
Loading...
