2FB/2FC-3
1-4-55
U253
Switching between double and single counts
Description
Switches the count system for the total counter and other counters.
Purpose
According to user (copy service provider) request, select if A3/11 x 17 or B4/Legal paper is to be counted as
one sheet (single count) or two sheets (double count).
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select double or single count. The selected item is displayed in reverse.
Initial setting: DOUBLE COUNT(A3/11
" x 17")
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
U254
Turning auto start function ON/OFF
Description
Selects if the auto start function is turned on.
Purpose
Normally no change is necessary.
According to user request, changes the setting.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select either ON or OFF. The selected item is displayed in reverse.
Initial setting: ON
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key.
The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
SINGLE COUNT Single count for all size paper
DOUBLE COUNT(A3/11 x 17)
Double count for A3/11
" x 17" paper only
DOUBLE COUNT(B4) Double count for B4/legal size or larger
Display Description
ON Auto start function on
OFF Auto start function off
To Next Page
Loading...
