2FB/2FC
1-4-69
U905
Checking/clearing counts by optional devices
Description
Displays or clears the counts of the DP or optional document finisher.
Purpose
To check the use of the DP and optional document finisher. Also to clear the counts after replacing consum-
able parts.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the device, the count of which is to be checked. The count of the selected device is displayed.
DP
Document finisher
Clearing
1. Select the item to be cleared. The selected item is displayed in reverse.
To clear the counts for all, press the reset key.
2. Press the start key. The count is cleared.
To return to the screen for selecting an item, press the stop/clear key.
Completion
Press the stop/clear key at the screen for selecting an item.
The screen for selecting a maintenance item No. is displayed.
U906
Resetting partial operation control
Description
Resets the service call code for partial operation control.
Purpose
To be reset after partial operation is performed due to problems in the drawers or other sections, and the
related parts are serviced.
Method
1. Press the start key.
2. Press EXECUTE on the touch panel.
3. Press the start key to reset partial operation control.
The maintenance mode is exited, and the machine returns to the same status as when the main power
switch is turned on.
Maintenance
item No.
Description
Display Description
ADP Number of single-sided originals that has passed through the DP
RADP Number of double-sided originals that has passed through the DP
Display Description
CP CNT Number of copies that has passed
STAPLE Frequency the stapler has been activated
PUNCH Frequency the punch has been activated
STACK Frequency the stacker has been activated
SADDLE Frequency the center holding has been activated
To Next Page
Loading...
