EasyManua.ls Logo

Kyocera KM-6030 - Page 145

Kyocera KM-6030
463 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2FB/2FC
1-4-70
U907
Checking/clearing the count value on each ejection location
Description
Displays and resets the count value of ejected sheets on each ejection location.
Purpose
Checks the replacement period for maintenance parts. Also resets the count value after replacing the mainte-
nance parts.
Method
Press the start key. The screen for selecting an item is displayed.
The count value on each ejection location is displayed.
Clearing
1. Select the count to be cleared. The selected item is displayed in reverse.
To clear the counts for all, press the reset key.
2. Press the start key. The count is cleared.
When clearing all counts, the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the count, press the stop/clear key. The screen for selecting a
maintenance item No. is displayed.
U908
Checking the total counter value
Description
Displays the total counter value.
Purpose
To check the total counter value.
Method
Press the start key. The screen for total count value is displayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U909
Checking/clearing the fuser web count
Description
Displays and clears the count of the fuser web roller operation.
Purpose
To clear the fuser web counts after replacing the fuser web roller during maintenance or for other reasons.
Method
Press the start key.
Clearing
1. Press the reset key.
2. Press the start key. The value is cleared. The screen for selecting a maintenance item No. is displayed.
Setting
1. Enter a seven-digit value using the numeric keys.
2. Press the start key. The value is set. The screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the count, press the stop/clear key.
The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
STRAIGHT Straight ejection count
SWITCH BACK Reversed ejection count
AUTO DUPLEX Duplex ejection count

Table of Contents

Other manuals for Kyocera KM-6030

Related product manuals