v
Sending Scanned Image Data to FTP server
Upload the scanned data from the scanner to the FTP server directly.
The following shows the basic scanning flow to the FTP server. For a more detailed explanation of each
step, refer to the indicated reference page. Click on the reference page will take you directly to the proper
page.
* This function is not available by KM-1650/2050/2550/C850.
Sending scanned image data
Use the scanner to designate the FTP server and
send scanned image data directly.
* Network settings as well
as the sender and
destination address
registration procedures
can be accomplished at
the scanner itself. For
information on these
procedures, refer to the
<Setup Edition> of this
Operation Guide.
Making basic settings
To use Scan to FTP function, you need to specify
the network settings and register the FTP server
on the web browser.
See page
2-1
Settings and registra-
tion using an Internet
Web browser
To Next Page
Loading...
Need help?
General
