2PZ-1
1-5-71
46. Slide the cursors to the center of the
original tray and lift up the original tray.
Figure 1-5-116
47. Release three hooks in the machine
rear side of the DP rear cover. (in the
order of hook A → B→ C)
Release the hook D and E at the
machine front side while rotating the DP
rear cover in the arrow's direction and
then remove it.
*: Release the hook A, B and C while press-
ing the upper part of the hook to prevent
the hook from breaking.
Figure 1-5-117
Cursols
Original tray
Hook D
Hook E
DP top cover
Hook A
Hook B
Hook C
DP rear cover
To Next Page
Loading...
