6-45
Sending > Scanning using TWAIN
Scanning using TWAIN
This section explains how to scan an original using TWAIN.
The procedure for scanning using the TWAIN driver is explained as an example. The WIA driver is used in the same
way.
1
Display the window.
1 Activate the TWAIN compatible application.
2 Select the machine using the application and display the TWAIN dialog box.
2
Configure the function.
Select scanning settings in the TWAIN dialog box that opens.
For settings that appear in the TWAIN dialog box, see Help for each application software.
For selecting the machine, see the Operation Guide or Help for each application software.
To Next Page
Loading...
