Kyocera TASKalfa 266ci - Changing Device Information

2-33
Preparation before Use > Command Center RX
Changing Device Information
Change the device information of the machine.
1
Display the screen.
1 Access Command Center RX by referring to Accessing Command Center RX on page 2-31.
2 From the Device Settings menu, select System.
2
Specify the host name.
Enter the device information, and then click Submit.
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
To restart the network interface card, click Reset in the Management Settings menu,
and then click Restart Network in “Restart”.
3
2
1