9-19
Setup, Registration, and User Management > System Menu
System/Network
Configures machine system settings.
Network
Configures network settings.
Host Name
TCP/IP Settings
Item Description
Host Name Check the host name of the machine.
Item Description
TCP/IP Set up TCP/IP to connect to the Windows network.*
Value: Off, On
* After changing the setting, restart the system or turn the machine OFF and then ON.
IPv4 Settings Set up TCP/IP (IPv4) to connect to the network. The IPv4 setting is available when selecting
[On] for [TCP/IP].*
DHCP Select whether or not to use the DHCP (IPv4) server.
Value: Off, On
Auto-IP Select whether or not to use Auto-IP.
Value: Off, On
IP Address Set the IP addresses. When the DHCP setting is [On], the current IP address is displayed and
cannot be changed. When setting an IP address, set the DHCP setting to [Off].
Value: ###.###.###.###
Subnet Mask Set the IP subnet masks. When the DHCP setting is [On], the current Subnet Mask is displayed
and cannot be changed. When setting an Subnet Mask, set the DHCP setting to [Off].
Value: ###.###.###.###
Default Gateway Set the IP gateway addresses. When the DHCP setting is [On], the current Default Gateway is
displayed and cannot be changed. When setting an Default Gateway, set the DHCP setting to
[Off].
Value: ###.###.###.###
To Next Page
Loading...
