EasyManuals Logo

Kyocera TASKalfa 3500i User Manual

Kyocera TASKalfa 3500i
558 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #524 background imageLoading...
Page #524 background image
Appendix-16
Other Paper Specifications
Porosity: The density of the paper fibers
Stiffness: Paper must be stiff enough or it may buckle in the machine, causing jams.
Curl: Most paper naturally tends to curl after the package is opened. When paper passes through the fixing unit,
it curls upward slightly. To deliver flat printouts, load the paper so that the curl faces towards the bottom of the
paper tray.
Static electricity: During printing, paper is electrostatically charged so that the toner adheres. Choose paper
that can be discharged quickly so that copies do not cling together.
Whiteness: Paper whiteness affects print contrast. Use whiter paper for sharper, brighter copies.
Quality: Machine problems may occur if sheet sizes are not uniform or if corners are not square, edges are
rough, sheets are uncut, or edges or corners are crushed. In order to prevent these problems, be especially
careful when you cut the paper yourself.
Packaging: Choose paper that is properly packaged and stacked in boxes. Ideally, the packaging itself should
have been treated with a coating to inhibit moisture.
Specially treated paper:
We do not recommend printing onto the following types of paper, even if it conforms to
the basic specifications. When you use these kinds of paper, purchase a small amount first as a sample to test.
• Glossy paper
• Watermarked paper
• Paper with an uneven surface
• Perforated paper
Special Paper
This section describes printing onto special paper and print media.
The following paper and media can be used.
• Transparencies
• Preprinted paper
• Bond paper
• Recycled paper
• Thin paper (from 60 g/m
2
to105 g/m
2
or less)
• Letterhead
• Colored paper
• Prepunched paper
• Envelopes
• Cardstocks (Hagaki)
• Thick paper (from 106 g/m
2
to 300 g/m
2
or less)
• Labels
• Coated paper
• High-quality paper

Table of Contents

Other manuals for Kyocera TASKalfa 3500i

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera TASKalfa 3500i and is the answer not in the manual?

Kyocera TASKalfa 3500i Specifications

General IconGeneral
TypeAll in One Printer
FunctionsPrint, Copy, Scan, Fax
Print TechnologyLaser
Print Speed35 ppm
Copy Speed35 cpm
Copy Resolution600 x 600 dpi
Scan Resolution600 x 600 dpi
Maximum Paper SizeA3
Duplex PrintingYes
Monthly Duty Cycle150, 000 pages
Zoom Range25% - 400%
Fax Resolution400 x 400 dpi
Standard Paper Capacity500 sheets
ConnectivityUSB 2.0, Ethernet
Memory1 GB
Hard Disk Drive160 GB (Optional)
Control Panel7 inch Touch Screen Display
Scan Speed80 ipm (300 dpi, A4, Mono)

Related product manuals