Maintenance
11-18
Conveying Guide
Clean the conveyor guide regularly (at least monthly) to ensure optimum output quality.
IMPORTANT: Wipe the slit glasses with the dry accessory cloth. Do not use water,soap or solvents for cleaning.
Do not touch the photoconductor drum.
1 Pull out cassette 1 and remove the cloth from the
cleaning cloth compartment.
2 Pull up the lever and open the right cover 1.
3 Wipe off the dirt on both sides of the conveying
guide.
4 Press the specified position of the right cover 1 to
close.
5 Return the cleaning cloth to the cleaning cloth
compartment and push cassette 1 back in place
securely.
To Next Page
Loading...
