Kyocera TASKalfa 3500i User Manual

Preparation before Use
2-5
2
Connecting Cables
Connecting LAN Cable (Optional)
Follow the steps below to connect a LAN cable to the machine.
1 When the machine is powered up, first press the
Power key on the operation panel. Check that the
Power indicator, the processing indicator and the
memory indicator are off. After this, turn off the
main power switch.
2 Connect the LAN cable to the network interface
connector located on left side of the body.
3 Connect the other end of the cable to the hub.
4 Power on the machine, and configure the network.
For details, refer to Network Setup (LAN Cable
Connection) on page 2-13.
Make sure that lamps
other than this lamp
are off.

Kyocera TASKalfa 3500i Specifications

General

Type	All in One Printer
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Speed	35 ppm
Copy Speed	35 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Maximum Paper Size	A3
Duplex Printing	Yes
Monthly Duty Cycle	150, 000 pages
Zoom Range	25% - 400%
Fax Resolution	400 x 400 dpi
Standard Paper Capacity	500 sheets
Connectivity	USB 2.0, Ethernet
Memory	1 GB
Hard Disk Drive	160 GB (Optional)
Control Panel	7 inch Touch Screen Display
Scan Speed	80 ipm (300 dpi, A4, Mono)