(Page.9/11) 
 Service Bulletin  Ref. No. 2TV-0015 (J130) 
(Service information)   <Date>  July 19, 2019 
KYOCERA Document Solutions Inc. 
 
           For authorized KYOCERA engineers only.  
Do not distribute to non-authorized parties. 
Pass through the FFC terminal (z) disconnected at 
Procedure 8 in between DUCT COVER INNER of 
the new LSU drive unit (s) and the edge of the 
drum relay PWB (y). 
 
Connect the FFC terminal (z) to the FFC 
connector of the drum relay PWB (y). 
 
Reattch COVER DUCT LEFT (w).  
Pass the LSU cleaning  motor wire (q) through the 
hole (v) on the left frame of the main unit (Refer to 
Procedure 6)