5-29
Operation on the Machine > Scanning Document stored in a Custom Box
Scanning Document stored in a Custom Box
Follow the steps as below for scanning a document stored in a custom box using the TWAIN driver.
Configuring Settings before Sending
Before sending a document, confirm that TWAIN driver is installed on a computer and the settings are configured.
Setting TWAIN Driver (page 2-43)
Scanning Document Stored in a Box
This subsection explains how to scan an original using an application supporting TWAIN.
1
Display the screen.
1
Activate the TWAIN compatible application software.
2
Select the machine using the application and display the dialog box.
2
Display lists of documents.
1
Select a custom box stored a document. If a password has been set for the box, the
password entry screen appears. Enter the password and click the [
OK
] button. When you
select a box, the document files in the Custom Box appear in [
Document List
].
2
Set how to display the document data. Click the [
Setting
] button to select each item.
3
Click [
OK
] button.
To Next Page
Loading...
