Kyocera TASKalfa 356ci User Manual

5-33
Operation on the Machine > DSM Scan
DSM Scan
A scanned document can be automatically saved in any format or sent to any destination by reading a scan process
from Active Directory. This function only supports the computers installed Windows Server 2008 R2 or Windows Server
2012.
Configuring Settings before Sending
If you are performing DSM scan, check the items below.
• The machine is connected to an Active Directory on the network that the scan process can reference.
• "DSM Scan", "LDAP" and "HTTP" are set to [
On ] in Network.
• "SSL" is set to [
On ] in Network.
•[
Network Authentication ] is set in.
Executing DSM Scan
1
[Home] key > [Send]
2
Place the originals.
3
Display the screen.
Select [ WSD Scan/DSM Scan ].
If WSD Scan is set to [
Off ] in the network settings, select [ DSM Scan ] and go to step 5.
Protocol Settings (page 8-44)
Security Settings (page 8-45)
Enabling User Login Administration (page 9-3)
NOTE
If the Active Directory that the scan process can reference is not on the network authentication server, DSM must be
set in Command Center RX.
Command Center RX User Guide
NOTE
Depending on the settings, the address book screen may appear. In this event, select
[
Cancel ] to display the screen for sending.
Loading Originals (page 5-2)
WSD Scan (page 8-44)

Kyocera TASKalfa 356ci Specifications

General

Print Resolution	1200 x 1200 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Standard
Monthly Duty Cycle	Up to 150, 000 pages
Type	Color Multifunctional Printer
First Print Out Time (Black)	6.5 seconds or less
Copy Resolution	600 x 600 dpi
Operating Systems Supported	Windows, Mac OS, Linux
Print Speed	35 ppm (black/color)
Paper Capacity	Max 3, 100 sheets
Memory	4 GB
Hard Drive	320 GB
Paper Input	Standard 600 sheets, Max 3, 100 sheets
Paper Size	Legal
Interface	10/100/1000BaseTX
Scan Resolution	600 dpi
Scan Features	Scan to Email, Scan to FTP
Copy Speed	35 cpm (black/color)
Fax	Optional
Max Paper Size	8.5" x 14"
Network Connectivity	Ethernet