2LK/2LN/2LM/2LC-2
1-3-45
U053 Setting: [Motor2]
1. Select the item to be adjusted.
*: 45 ppm/55 ppm model only
Setting: [Motor3]
1. Select the item to be adjusted.
*: 45 ppm/55 ppm model only.
Item No. Description
Display Description
Setting
range
Initial
setting
Dev(K) Developer motor K (DEVM-K) -5000 to 5000 0
Dev(CMY) Developer motor MCY (DEVM-MCY) -5000 to 5000 0
Trans Belt Transfer motor (TRM) -5000 to 5000 0
Regist* Registration motor (RM) -5000 to 5000 0
Belt Clean Transfer cleaning motor (TRCM) -5000 to 5000 0
Display Description
Setting
range
Initial setting
30ppm 35ppm 45ppm 55ppm
SB Eject motor (EM) -5000 to 5000 -51 -44 -34 -30
Fixing Fuser motor (FUM) -5000 to 5000 0 0 0 0
Bridge1 Bridge conveying motor 1
(BRCM1)
-5000 to 5000 -77 -66 -51 -46
Bridge2 Bridge conveying motor 2
(BRCM2)
-5000 to 5000 -77 -66 -51 -41
Feed Paper feed motor (PFM) -5000 to 5000 0 0 0 0
Job Sepa-
rator
JS eject motor (JSEM) -5000 to 5000 0 0 0 0
Mid Roller* Middle motor (MM) -5000 to 5000 - - 0 0
DU1* Duplex motor 1 (DUM1) -5000 to 5000 - - -50 -45
DU2* Duplex motor 2 (DUM2) -5000 to 5000 - - -50 -45
To Next Page
Loading...
