2LK/2LN/2LM/2LC-2
1-3-50
U059 Setting fan mode
Description
Specifies mode for paper conveying fan motors during conveying paper.
Purpose
Change mode if paper crease occurs.
Method
1. Press the start key.
2. Select the mode.
Setting: [Fan Mode]
1. Select the mode.
Initial setting: Mode1
2. Press the start key. The setting is set.
Setting: [Cooling Mode]
1. Change the setting value using the +/- keys.
A larger value advances the operating timing, and a smaller value slows it.
2. Press the start key. The value is set.
Completion
Press the stop key. The indication for selecting a maintenance item No. appears.
Item No. Description
Display Description
Fan Mode Sets temperature at which paper conveying fan motors operate.
Cooling Mode Sets temperature at which the paper conveying fan motors are
switched for controlling.
Display Description
Mode1 Temperature at which paper conveying fan motors operate: High
Mode2 Temperature at which paper conveying fan motors operate: Normal
Mode3 Temperature at which paper conveying fan motors operate: Low
Auto It begins with Mode2 at power up or recovery from sleep mode, and
switches to Mode3 when the thermistor detects higher than 38 Ā°C.
Display Description
Setting
range
Initial
setting
Cooling Mode Amount of shift from the initial standard
temperature
-3 to 3 (Ā°C) 0
To Next Page
Loading...
