2LK/2LN/2LM/2LC
1-3-91
U135 Checking toner motor operation
Description
Drives toner motors.
Purpose
To check the operation of toner motors.
Remarks
When driving the toner motors long time or several times, developer section becomes the toner
full and is locked.
Method
1. Press the start key.
2. Select [Toner].
3. Press the start key. The operation starts.
4. To stop the operation, press the stop key.
Completion
Press the stop key after operation stops. The screen for selecting a maintenance item No. is dis-
played.
U136 Setting toner near end detection
Description
Sets the level that indicates the number of sheets that can be printed from occurrence of toner
near end to toner empty.
Purpose
To change the setting to advance detection of near end if the interval from toner near end to toner
empty seems too short.
Setting
1. Press the start key.
2. Select the item to be set.
3. Change the value using the +/- or numeric keys.
Increasing the setting makes the interval from toner near end to toner empty longer.
Decreasing the setting makes the interval from toner near end to toner empty shorter.
If 0 is set, toner near end will not be detected.
4. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
Toner Toner motor (TM) is turned on
Display Description
Setting
range
Initial
setting
CMY Setting the level of cyan/magenta/yellow toner 0 to 9 3
K Setting the level of black toner 0 to 9 3
To Next Page
Loading...
