2LK/2LN/2LM/2LC-2
1-3-118
U237 Setting finisher stack quantity
Description
Sets the number of sheets of each stack on the main tray and on the middle tray in 4000-sheet
finisher.
Purpose
To change the setting when a stack malfunction has occurred.
Method
1. Press the start key.
2. Select the item to be set.
Setting: [Main Tray]
1. Change the setting using the +/- keys or numeric keys.
Initial setting: 0
2. Press the start key. The setting is set.
3. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
Setting: [Middle Tray]
1. Change the setting using the +/- keys or numeric keys.
Initial setting: 0
Number of sheets of stack on the internal tray for non-staple copying: 10 sheets
2. Press the start key. The setting is set.
3. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
Item No. Description
Display Description
Main Tray Number of sheets of stack on the main tray
Middle Tray Number of sheets of stack on the middle tray for staple mode
Display Description
0 Number of sheets of stack on the main tray: 4000 sheets
1 Number of sheets of stack on the main tray: 2000 sheets
Display Description
0 Number of sheets of stack on the middle tray for staple mode:
65 sheets
1 Number of sheets of stack on the middle tray for staple mode:
30 sheets
To Next Page
Loading...
