Kyocera TASKalfa 5550ci - Page 217

2LK/2LN/2LM/2LC
1-3-123
U241 Method: [Booklet]
1. Turn each switch or sensor on and off manually to check the status.
When the on-status of a switch or sensor is detected, that switch or sensor is displayed in
reverse.
Method: [Punch]
1. Turn each switch or sensor on and off manually to check the status.
When the on-status of a switch or sensor is detected, that switch or sensor is displayed in
reverse.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
HP CF paper entry sensor (CFPES)
Eject CF eject sensor (CFES)
Paper CF paper sensor (CFPS)
Tray Full CF tray full sensor (CFTFS)
Bundle Up HP CF adjustment sensor 1 (CFADS1)
Bundle Down HP CF adjustment sensor 2 (CFADS2)
Width Up HP CF side registration sensor 1 (CFSRS1)
Width Down HP CF side registration sensor 2 (CFSRS2)
Blade HP CF blade sensor (CFBLS)
Tray CF tray switch (CFTSW)
Set CF set switch (CFSSW)
Left Guide CF left guide switch (CFLGSW)
Vertical Feed CF paper conveying sensor (CFPCS)
Display Description
Punch HP Punch home position sensor (PUHPS)
Edge Face1 Punch paper edge sensor (PUPES)
Edge Face2 Punch paper edge sensor (PUPES)
Edge Face3 Punch paper edge sensor (PUPES)
Edge Face4 Punch paper edge sensor (PUPES)
Tank Punch tank set switch (PUTSSW)
Tank Full Punch tank full sensor (PUTFS)