2LK/2LN/2LM/2LC-2
1-3-125
U244 Checking the DP switches
Description
Displays the status of the respective switches and sensors in the DP.
Purpose
To check if respective switches and sensors in the DP operate correctly.
Method
1. Press the start key.
2. Turn each switch or sensor on and off manually to check the status.
When the on-status of a switch or sensor is detected, that switch or sensor is displayed in
reverse.
*1: Reversed DP only. *2: Dual scan DP only.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
Feed DP feed sensor (DPFS)
Regist
*1
DP registration sensor (DPRS)
Timing DP timing sensor (DPTS)
CIS Head
*2
DP CIS sensor (DPCS)
Tray
*1
DP switchback sensor (DPSBS)
Set DP original sensor (DPOS)
Longitudinal DP original length switch (DPOLSW)
Lift U-Limit DP lift sensor 1 (DPLS1)
Lift L-Limit DP lift sensor 2 (DPLS2)
Cover Open DP interlock switch (DPILSW)
Open DP open/close switch (DPOCSW)
Eject DP eject sensor (DPES)
Slant
*2
DP slant sensor (DPSS)
To Next Page
Loading...
