2LK/2LN/2LM/2LC-2
1-3-140
U271 Setting the page count
Description
Banner counting
Purpose
To change when modifying counting Banner
Setting
1. Press the start key.
2. Select the item.
3. Change the setting value using the +/- keys or numeric keys.
4. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U276 Setting the copy count mode
Description
Sets the count mode of single color mode.
Purpose
To change the charging counter which counts up in single color printing.
Setting
1. Press the start key.
2. Select the mode.
Initial setting: Mode 0
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description Setting
range
Initial
setting
Banner A Counting for Banner A (470.1mm to
915mm/18.51ā to 36ā)
2 to 30 2
Banner B Counting for Banner B (915.1mm to
1,220mm/36.01ā to 48ā)
2 to 30 3
Display Description
Mode0 This lets the full color counter count up in single color
Mode1 This lets the single color counter count up in single color
To Next Page
Loading...
