2LK/2LN/2LM/2LC
1-3-184
U469 Method: [Belt Initialize]
1. Select [Execute].
2. Press the start key. Transfer belt speed correction starts.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U474 Checking LSU cleaning operation
Description
Provides cleaning LSU by means of the LSU cleaning motor. Also, the cleaning cycle can be
adjusted.
Method
1. Press the start key.
2. Select the item.
Method: [Execute]
1. Press the start key. Cleaning the LSU slit glass.
Setting: [Cycle]
1. Change the setting value using +/- keys.
The setting can be changed by 1000 per step.
2. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
Execute Executing the cleaning operation
Cycle Setting the cleaning cycle
Display Description
Setting
range
Initial
setting
Cycle Cleaning cycle 0 to 5000 1000
To Next Page
Loading...
