Kyocera TASKalfa 5550ci - Page 381

2LK/2LN/2LM/2LC
1-4-83
8310 CF side registration motor 2
error
When initial operation, CF
side registration sensor 2
does not turn on within 1 s.
Defective connec-
tor cable or poor
contact in the con-
nector.
Reinsert the connector. Also check for conti-
nuity within the connector cable. If none,
replace the cable.
CF side registration motor 2 and CF main
PWB (YC10)
CF side registration sensor 2 and CF main
PWB (YC20)
Defective CF side
registration sensor
2.
Replace CF side registration sensor 2.
Defective CF side
registration motor
2.
Replace CF side registration motor 2.
Defective CF main
PWB.
Replace the CF main PWB and check for
correct operation.
8320 CF adjustment motor error
When initial operation, CF
adjustment sensor does not
turn on within 2.5 s.
Defective connec-
tor cable or poor
contact in the con-
nector.
Reinsert the connector. Also check for conti-
nuity within the connector cable. If none,
replace the cable.
CF adjustment motor 1, 2 and CF main PWB
(YC10)
CF adjustment sensor 1, 2 and CF main
PWB (YC20)
Defective CF
adjustment sensor
1, 2.
Replace CF adjustment sensor 1, 2.
Defective CF
adjustment motor
1, 2.
Replace CF adjustment motor 1, 2.
Defective CF main
PWB.
Replace the CF main PWB and check for
correct operation.
8330 CF blade motor error
When initial operation, CF
blade sensor does not turn on
within 1.5 s.
Defective connec-
tor cable or poor
contact in the con-
nector.
Reinsert the connector. Also check for conti-
nuity within the connector cable. If none,
replace the cable.
CF blade motor and CF main PWB (YC15)
CF blade sensor and CF main PWB (YC20)
Defective CF blade
sensor.
Replace the CF blade sensor.
Defective CF blade
motor.
Replace the CF blade motor.
Defective CF main
PWB.
Replace the CF main PWB and check for
correct operation.
Code Contents Causes
Check procedures/
corrective measures