Kyocera TASKalfa 5550ci - Page 470

2LK/2LN/2LM/2LC-2
1-5-52
11. Release the wire saddle.
12. Remove two wire holders.
13. Remove two screws.
14. Remove the fan motor holder.
Figure 1-5-82
15. Remove five screws from the main
PWB.
Figure 1-5-83
Wire holder
Wire holde
r
Screws
Fan mootor holder
Controller box
Wire saddle
Screws
Main PWB
Main PWB
Screw
Screws