Kyocera TASKalfa 5550ci - Page 50

2LK/2LN/2LM/2LC-2
1-2-26
26. Mount two M4 nuts at the back of the
right upper cover.
Figure 1-2-33
27. Insert the projection of the key counter
cover retainer in the aperture of the
right upper cover.
28. Fit the key counter cover retainer using
the two M4 x 20 screws.
Figure 1-2-34
M4 nuts
Right upper cover
Right upper cover
Aperture
Key counter
cover retainer
M4 x 20 screw
M4 x 20 screw
Projection