Kyocera TASKalfa 5550ci - Page 57

2LK/2LN/2LM/2LC-2
1-2-33
13. Pass the key counter signal cable
through the aperture in the document
table.
14. Fit the key counter cover to the docu-
ment table using the M4 x 6 screw.
15. Connect the key counter signal cable to
the key counter wire.
Figure 1-2-43
Aperture
Key counter
cover
Key counter
signal cable
Key counter
signal cable
Key counter wire
M4 x 6 screw