Kyocera TASKalfa 5550ci - Page 645

2LK/2LN/2LM/2LC
2-3-95
YC3
25 DATA_1N_C(LVD
S)
I 0/3.3 V DC (pulse) Video data signal C (N)
Connected to
engine PWB
26 DATA_1P_C(LVD
S)
I 0/3.3 V DC (pulse) Video data signal C (P)
27 SGND - - Ground
28 REM C I 0/24 V DC PM-C: On/Off
29 LOCK C O 0/3.3 V DC PM-C lock signal
30 CLK C I 0/3.3 V DC (pulse) PM-C clock signal
31 SGND - - Ground
32 BD M O 0/3.3 V DC (pulse) Horizontal synchronization signal M
33 LSU_TH M O Analog LSU thermistor M detection signal
34 CUALM M O 0/3.3 V DC APCPWB-M alarm signal
35 PALA_SIG P3 M I 0/3.3 V DC APCPWB-M control signal
36 PALA_SIG P4 M I 0/3.3 V DC APCPWB-M control signal
37 SGND - - Ground
38 SDCLK M I 0/3.3 V DC (pulse) APCPWB-M clock signal
39 SGND - - Ground
40 DATA_1N_M(LVD
S)
I 0/3.3 V DC (pulse) Video data signal M (N)
41 DATA_1P_M(LVD
S)
I 0/3.3 V DC (pulse) Video data signal M (P)
42 SGND - - Ground
43 REM M I 0/24 V DC PM-M: On/Off
44 LOCK M O 0/3.3 V DC PM-M lock signal
45 CLK M I 0/3.3 V DC (pulse) PM-M clock signal
46 SGND - - Ground
47 BD Bk O 0/3.3 V DC (pulse) Horizontal synchronization signal K
48 LSU_TH Bk O Analog LSU thermistor K detection signal
49 CUALM Bk O 0/3.3 V DC APCPWB-K alarm signal
50 PALA_SIG P3 Bk I 0/3.3 V DC APCPWB-K control signal
51 PALA_SIG P4 Bk I 0/3.3 V DC APCPWB-K control signal
52 SGND - - Ground
53 SDCLK Bk I 0/3.3 V DC (pulse) APCPWB-K clock signal
54 SGND - - Ground
55 DATA_1NBk(LVD
S)
I 0/3.3 V DC (pulse) Video data signal K (N)
56 DATA_1PBk(LVD
S)
I 0/3.3 V DC (pulse) Video data signal K (P)
Connector Pin Signal I/O Voltage Description