Kyocera TASKalfa 5550ci - Page 68

2LK/2LN/2LM/2LC-2
1-2-44
20. Connect the connector of the MK-2 sig-
nal cable to the connector YC25 on the
engine PWB.
21. Remove the screw from the machine.
22. Fix the MK-2 signal cable to the ground
terminal with the screw that was
removed.
Figure 1-2-58
Engine PWB
MK-2 signal cable
Screw
Ground terminal
Ground terminal
Screw
YC25
Engine PWB