Kyocera TASKalfa 650c

2 SENDING/RECEIVING A FAX
26 Sending a Fax
 Changing the settings for each page
You can change the scanning conditions (RESOLUTION, MODE, EXPOSURE and ORIGINAL) for each page.
1
When the scanning of the original is completed, the confirmation screen for the next
original is displayed. Press [OPTION].
The illustration above shows the original placed on the original glass. If an original is placed on the RADF
(Reversing Automatic Document Feeder) and you press the [STOP] button on the control panel halfway through
the scanning, it halts and the confirmation screen is displayed.
2
The setting screen for the scanning conditions is displayed. Change the setting, and
then press [OK].
 P.23 “Making settings”