Kyocera TASKalfa 650c

4 ADVANCED FUNCTIONS
50 Transmitting 2-Sided Originals
Transmitting 2-Sided Originals
You can send a copy of 2-sided originals by fax using the RADF (Reversing Automatic Document Feeder).
Note that each setting will automatically return to its default setting when transmission is completed.
1
Place the original(s) on the RADF.
 P.19 “Handling an original”
When you place a 2-sided original of the LT/A4 size, change the direction of the original depending on its bound
position as follows:
1. Right-to-left (book-type) original
2. Top-to-bottom (tablet-type) original
2
Press the [FAX] button on the control panel.
 P.16 “Basic procedures”
3
Press [OPTION] and set the transmission conditions.
 P.23 “Setting the transmission conditions”
4
Select the [ADVANCED] tab, and then press [2-SIDED SCAN].
5
Press [BOOK] or [TABLET] depending on the bound position of the original(s), and
then press [OK].
6
Specify the recipient’s fax number.
 P.27 “Specifying the recipient”
1 2