What to do if I get a Hardcopy Security Printing error on my Kyocera TASKalfa 650c?
This error indicates that printing the data, including its security pattern, is not permitted. Contact your service representative.
What to do if my Kyocera Fax Machine has an original jam?
If you experience an original jam on your Kyocera Fax Machine, try the following: * Clear the jammed original. * Firmly close the open door. * Check the power interruption report. * Note that transmission is cancelled if printing paper is jammed during direct transmission. * Check polling options setup (Security code, etc.), and confirm the polling document exists. * Ensure sufficient memory before retrying. * Retry communications. * Confirm the remote party’s security code, system password, and your setup. * Retry communications.
How to fix memory overflow on Kyocera Fax Machine?
If your Kyocera Fax Machine displays a memory overflow when scanning documents, either wait for the memory to be cleared automatically, or manually check the jobs and delete reserved jobs to free up memory.
What to do if Kyocera Fax Machine says job reservation full?
If your Kyocera Fax Machine indicates that the job reservation is full because the number of reserved jobs has exceeded 100, either wait for existing job reservations to complete, or manually check the jobs and delete reserved jobs.
What to do if Kyocera Fax Machine shows job memory full?
If your Kyocera Fax Machine displays 'Job memory full' because the total number of destinations for reserved jobs exceeded 1000, either wait for job reservations to complete, or check the jobs and delete reserved jobs.
Why does my Kyocera Fax Machine say 'Sorry not possible'?
If your Kyocera Fax Machine displays 'Sorry not possible' because on-hook or direct TX was attempted during communications, wait for the current communications to end and then retry your communication.
Why Kyocera Fax Machine says 'Not allowed now'?
If your Kyocera Fax Machine displays 'Not allowed now' because a further polling transmission reservation was attempted when one was already reserved, either wait for the polling transmission jobs to be completed, or check the jobs and delete reserved jobs.
What to do if Kyocera Fax Machine says 'Too Many Tel # Digits'?
If your Kyocera Fax Machine displays 'Too Many Tel # Digits', it means 128 digits or more were registered for a chain dial communication. Confirm the number of digits dialed and register the numbers again.
How to fix a bad certificate error on Kyocera Printer Accessories?
If your Kyocera Printer Accessories display a 'Bad certificate' error, it means an unsupported certificate is installed. Reinstall the appropriate certificate. This equipment supports md5RSA and sha1RSA certificates only.
What to do if I get a 'Certificate expired' error on Kyocera Printer Accessories?
If you see a 'Certificate expired' error on your Kyocera Printer Accessories, it means the certificate has expired. Verify that the time is set correctly or check if the certificate has indeed expired.
General| Category | All in One Printer |
|---|---|
| Print Speed (Black) | 65 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Max Resolution (DPI) | 1200 x 1200 dpi |
| Standard Paper Capacity | 1, 150 sheets |
| Duplex Printing | Yes |
| Operating System Compatibility | Windows, Mac, Linux |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Type | Color |
| Paper Size | Letter, Legal, A4, A5, B5 |
| Connectivity | USB, Ethernet |
| Network Connectivity | Ethernet |
| Fax Resolution | 400 x 400 dpi |
To Next Page
