2 RECOMMENDED INSTALLATION
28 Procedure for Recommended Installation
Procedure for Recommended Installation
Please install the software by the recommended installation when you want to install all software on a Windows computer.
Installing the client software by recommended installation
The following describes an installation on Windows Vista. The procedure is the same when other versions of Windows are
used.
y You must log into Windows as a user who has the “Administrators” or “Power Users” privilege. You must log into
Windows as a user who has the “Administrators” privilege when using Windows XP/Vista/Server 2003/Server
2008.
y Only users with the administrator privilege can perform this. For users without the administrator privilege,
installation is possible by performing the following procedure and having the administrator privilege temporarily.
- Double-click “Open folder to view files” in the AutoPlay menu.
- Open the “Setup” folder, right click “Setup.exe” and then select “Run as administrator”.
- Enter the administrator's password of the client computer to operate with an administrator's privilege and click
[OK].
1
Insert the Client Utilities CD-ROM into the CD-ROM drive.
If the installer does not automatically start, use the Explorer to open the “Setup” folder in the Client Utilities CD-
ROM and double-click “Setup.exe”.
2
Select [I agree to the terms of the License Agreement.] and click [Next].
y To change the display language, select a desired language from the [Select Language] box.
y The main menu window is displayed.
3
Click [Recommended].
To Next Page
Loading...
