Kyocera TASKalfa 650c

1.OVERVIEW
Setting up NetWare Print Server 15
1 OVERVIEW
 Setting up the NetWare in NDS mode
The following explains how to set up a NetWare 6.0/6.5 file server with NDS so that network users can print to this
equipment from their computers, and this equipment can obtain print jobs from the NetWare server. More detail is provided
in your NetWare documentation.
Setting up the NDS with NetWare Administrator
1
In NetWare Administrator, select the container object to create the printer and click the
[Object] menu and select [Create].
The [New Object] dialog box appears.
2
In the [Class of new object] list, select [Print Queue] and click [OK].
The [Create Print Queue] dialog box appears.
3
Select [Directory Service Queue] and enter the name of the print queue in the [Print
Queue name] box.
4
Click the [browse] at the next to the [Print Queue Volume] box.
The [Select Object] dialog box appears.
5
Select the volume to create a print queue and click [OK].
6
Click [Create].
The print queue is created.
7
Click the [Object] menu and select [Create].
The [New Object] dialog box appears.
8
In the [Class of new object] list, select [Printer] and click [OK].
The [Create Printer] dialog box appears.
9
Enter the printer name, select the [Define additional properties] check box and click
[Create].
10
Display the Assignments window and click [Add].
The [Select Object] dialog box appears.
11
Select a created queue and click [OK].
12
Display the Configuration window, select [Other/Unknown] at the Printer Type drop
down box and click [OK].
The printer is created.
13
Click the [Object] menu and select [Create].
The [New Object] dialog box appears.
14
In the [Class of new object] list, select [Print Server] and click [OK].
The [Create Print Server] dialog box appears.
15
Enter the print server name, select the [Define additional properties] check box and
click [Create].
The print server name must be “MFP_[NIC Serial Number]”. You can find the Unit Serial Number of the equipment
on the NIC Configuration list that can be printed from the control panel.
16
Display the Assignments window and click [Add].
The [Select Object] dialog box appears.
17
Select a created printer and click [OK].
18
Click [OK] to close Assignments window for the print server.
The print server is created.