3 CHECKING AND CANCELING THE COMMUNICATIONS
46 Canceling the Transmission
When using the RADF (Reversing Automatic Document Feeder)
This section describes how to cancel the memory transmission when an original is placed on the RADF.
1
Press the [STOP] button on the control panel while the originals are being scanned.
Scanning is paused.
2
The confirmation screen for the next original is displayed. Press [JOB CANCEL].
If you press [JOB FINISH], the scanned originals are sent.
If you leave the screen for the next original unattended for approximately 45 sec. after it appears, the memory
transmission is canceled.
3
The confirmation screen for the deletion is displayed. Press [YES].
To Next Page
Loading...
